Door Handle Replacement
It's worth it to replace door handles if you don't like the way they look or if they are difficult to use. Installing a new door handle is easy if you have patience.
Modern door handles are equipped with cover plates that conceal the screws to give them a beautiful appearance. If your new handle does not already have them attached, you will have to attach them separately.
Remove the handle that was previously used
Door handles are not only an important aesthetic addition to your home, but they're also crucial for safety as they let you lock and unlock your door. As time passes the door handle could start to lose its grip or feel a bit loose. It might also appear old and worn. This is a sign that it's probably the time to replace your door handle.
One of the first indications that your door handle is in need of replacing is when it becomes difficult to operate. This is a serious problem since you won't be able to lock or unlock the door, which could put you and your family at risk.
check out this site 's also recommended to replace the handle on your door when it's damaged or broken. A damaged or broken door handle is dangerous, especially for children and elderly family members who struggle to open it. They could become trapped. Luckily, it's quite simple to fix a damaged door handle by simply replacing the handle that was broken.
Most modern door handles are a standard size and so they are suitable for any door. If you're unsure if the new door handle you're buying will work, try removing the old one and determining the holes in its housing. This will allow you to purchase the right size door handle.
The easiest method to remove the door handle you have been using is to remove it from the door itself. This is usually done using a screw driver. However certain door handles come with a cover plate that conceals the mounting screws, so you'll need to pry off this to access the screws beneath. After you have removed the old handle, make a note of how the spindle is connected. This will aid in aligning the new handle.
You can also remove the door handle by depressing the latch mechanism. This is usually done using a screwdriver but you'll need to locate the small latch, which should be just to the left of the trim piece. After you have removed the latch, you can take the handle off the strike plate and then remove the latch away from the door's edge.
Remove the Strike Plate
When replacing your handle, you'll also be required to replace the latch plate, which is the hole which the door's latch hooks into when it closes. The new handles will come with two latch plates: a rectangular and circular plate (see the above diagram which shows the various parts of a door handle). If your current latch plate is rectangular, swap it over to the round one, so that the latch hooks into the strike plate in a way that makes the handle easier to use.
The first step is to take off the screw that holds the old latch plate. The screws are typically tight and require a lot of force to loosen them. If possible, it may be beneficial to have a second person help with this process.
After the screws have been removed, the latch plate should pull out of the door easily. If the latch plate is stuck or doesn't move use a small file to scrape the edges. This can help loosen the plate.
Now, you can proceed to creating the new door strike plate for installation. Attach the latch plate to the doorjamb using the wood screws that were included with your new handles. Be careful not to over-tighten the screws, as this could damage the strike plate.
If you're unsure whether the latch plate is in the correct position You can try closing and opening the door to check if it closes and latches correctly. If it does not you'll have to adjust the strikeplate upwards or down or forward or back until the door locks correctly.
If the door still moves or jiggles, then you may have to enlarge your latch hole on the strike plate. This is more prevalent on older doors. It can be caused by wear and tear hinges that aren't shallow, the wrong size latch or a damaged strike plate. If this is the situation, use a metal filing instead of a chisel, or hammer to adjust the strike plate.
Eliminating the Latch
The latch is the metal piece that is angled that is able to move through the hole that runs along the inside edge of your door. The latch moves forward when you turn the handle. It also hooks into a hole on the door frame so that the door remains closed. If your door shakes when you close, replacing the latch could be the only thing needed to fix the problem.
It's hard to see the screws that attach the latch to the door, however there's usually a small hole on the trim plate that allows you to insert a screwdriver into the slot and remove it. After removing the trim plate, you should be able to take off the latch, as well as the bolts that hold it, as well as the spindle in position.
If the latch is not easily removed then use a paperclip tool to remove it from the handle mechanism. Place the item into the recessed latch slot, and gently twist it or jiggle until the that the latch and handle are beginning to split. It is possible repeat this process a few times before you are able to take the latch off.
After the old latch has been removed it should be possible to insert the new latch into the slot without any issues. Make sure the latch is correctly positioned in the slot and is aligned with the screw chambers and then use the new screws to attach it to the strike plate and door frame.
Before installing the new handle, be certain to measure your existing backset (the distance from the center of the big hole on the front of the door to the edge). Verify that the size of the latch of the new handle matches the measurement.
If you are replacing the latch or handle or handle, or if the old lock cylinder has been damaged, then you will need a new one. If you're not changing locks the new lock will fit into the recess you have already installed, and work with the keys you have already. Be sure to select the latch with a rectangular cover plate that match the handles you have.
Removing the Cover Plate
Door handles can begin to look worn over time, but if you replace them with a contemporary lever on rose design it's an easy and quick DIY and decorating project that can improve the overall appearance of your home. You can purchase complete sets that include privacy adaptors, escutcheons, and escutcheons.
The first step in replacing an internal door handle is to remove the cover plate or rose, which covers the screws and the mechanism within. Use a flathead to remove the plate. It may have an opening on one edge or be held by a pin.
After the cover plate is removed take the screw that holds the inside handle in place, and then set it aside. You'll also need to remove the screws that hold the latch and plates to the door, which you can accomplish by loosening them using a Philips screwdriver. Remove the plates that hold the inner plate and latch from the door. Put them away.
Most doors have gaps between the jamb of the door and the edge of the frame, which allows for a handle, however not all have. If yours isn't, you will need to make a hole into the door. The procedure for this is the same procedure for opening a door with a lock, but you'll have to be extra careful not to damage the door or frame.
Installing new door knob screws is necessary after the holes have been made. Make sure to buy the same size as the previous ones, to ensure that you do not end up with the handle that is too tight or loose. You'll also need to install the new strike rod and latch plate that aren't included in the majority of door handle sets.
If you're looking for a quality replacement for your interior door handle set, try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory fit and has received a plethora of five-star reviews from satisfied customers. It's a great option to replace damaged or worn interior door handle hardware on your Chevy HHR.